Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/ontap/mc/MC-KBs/MCC_transitioning_to_single_path_HA_due_to_Brocade_switch_G620_hung
      Applies to Brocade G620 Cluster transitioned from Quad/multi path to mixed path cluster::> system node run -node local -command sysconfig -a System Serial Number: 7xxxxxxxxxxxx2 (node-01) System Rev: ...Applies to Brocade G620 Cluster transitioned from Quad/multi path to mixed path cluster::> system node run -node local -command sysconfig -a System Serial Number: 7xxxxxxxxxxxx2 (node-01) System Rev: A4 FC ports connected to switch are in OFFLINE hard state from all nodes FC Host Adapter 2c was connecting to switch port “switch:6” slot 2: FC Host Adapter 2c (Emulex XE201 rev. FC Host Adapter 0g was connecting to switch port “switch:2” slot 0: FC Host Adapter 0g (QLogic 8324 rev.