Applies to Ontap FlexArray E-Series storage errors show See error explanation for :This array LUN is an access control LUN. It is not supported and should be masked off or disabled FAS8200::> storage ...Applies to Ontap FlexArray E-Series storage errors show See error explanation for :This array LUN is an access control LUN. It is not supported and should be masked off or disabled FAS8200::> storage errors show Disk: 0g.1L7 0g.1L7 (6d0): This array LUN is an access control LUN. It is not supported and should be masked off or disabled. ONTAP FlexArray connected to E-Series storage array with host access LUN ( normally LUN ID 7 by default) added to ONTAP disk aggregate host access group
storage disk show command throws error stating- "This array LUN is only available on one path. Array luns were visible only on three paths instead of four paths for directly connected FlexArray Storag...storage disk show command throws error stating- "This array LUN is only available on one path. Array luns were visible only on three paths instead of four paths for directly connected FlexArray Storage with E-Series Storage. Note: Command - node run -node <node-name> storage disable adapter <adapter> can be run to disable the FC Initiator port and node run -node <node-name> storage enable adapter <adapter> can be run to enable the FC Initiator port.
