Applies to FAS2820 Issue Diag test under tri-path configuration show following three issue: ・System test for PM8072(SAS port) failed System Test Summary: Onboard: PM8072 : FAILED ・The LEDs of the shel...Applies to FAS2820 Issue Diag test under tri-path configuration show following three issue: ・System test for PM8072(SAS port) failed System Test Summary: Onboard: PM8072 : FAILED ・The LEDs of the shelf port connected to SAS port 0a on both nodes were light up to amber whenever the Diag Test was running or finished. ・After diag test done and boot ONTAP , sas port 0a show offline. slot 0: SAS Host Adapter 0a (PMC-Sierra PM8072 rev. C, SAS, <OFFLINE (hard)>)
Applies to FAS2820 Issue Diag test for FAN only visible from controller-A controller-A: FAN : PASSED controller-B: System Test Summary: PCH-I2C : PASSED M.2 SATA Drive : PASSED