Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/MismatchedHAPairtoPortRangeA_Alert_error_in_switched_NVMe_attached_storage
      Consult the guide "Setup and configuration guide for Cisco shared switches" to review the cabling rules for your system. to NVMe shelves with shared switches in the same port Probable Cause: Controlle...Consult the guide "Setup and configuration guide for Cisco shared switches" to review the cabling rules for your system. to NVMe shelves with shared switches in the same port Probable Cause: Controller node-2 is connected to NVMe storage Consult the guide applicable to your NVMe storage shelf to review cabling rules for your system. Connect controller node-2 to NVMe shelves SYSCONFIG-A of node-2 AutoSupport section or system ndoe run -node node-2 -command sysconfig -r example: