Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 2 results
    • MPIO path is changed after volume move
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/MPIO_path_is_changed_after_volume_move
      Applies to ONTAP 9 Issue MPIO path is changed after moving a volume to another HA pair. Example: Before volume move, MPIO shows 2 paths are active and 2 paths are enable. After volume move, MPIO shows...Applies to ONTAP 9 Issue MPIO path is changed after moving a volume to another HA pair. Example: Before volume move, MPIO shows 2 paths are active and 2 paths are enable. After volume move, MPIO shows 4 paths are active.
    • MPIO is changed after vol move
      https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/MPIO_is_changed_after_vol_move
      Applies to ONTAP 9 Issue The volume moves to a different HA pair. MPIO of host is changed from active/optimized and active/non-optimized to active/non-optimized and active/non-optimized.