Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • Brocade switch PSU not recognized after hot swap without reboot
      https://kb.netapp.com/on-prem/Switches/Broadcom-KBs/Brocade_switch_PSU_not_recognized_after_hot_swap_without_reboot
      Applies to Brocade G620 Power Supply Unit (PSU) Issue After replacing the switch PSU with the new one, the PSU still shows up as faulty: Example: psshow -v : Power Supply #1 is OK Power Supply #2 is f...Applies to Brocade G620 Power Supply Unit (PSU) Issue After replacing the switch PSU with the new one, the PSU still shows up as faulty: Example: psshow -v : Power Supply #1 is OK Power Supply #2 is faulty fanshow : Fan 1 is Ok, speed is 8341 RPM Fan 2 is Ok, speed is 8553 RPM