Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/How_to_configure_an_NTP_Server_on_E-Series
      When this feature is enabled, the controller periodically queries the configured NTP server, then uses the results to update its internal time-of-day clock. If only one controller has NTP enabled, the...When this feature is enabled, the controller periodically queries the configured NTP server, then uses the results to update its internal time-of-day clock. If only one controller has NTP enabled, the alternate controller periodically synchronizes its clock with the controller that has NTP enabled. Note: You can use a static IP address, either IPv4 or IPv6 addresses, to obtain an IP address from a DHCP server, or you can use a domain name as long as a DNS server is also configured.