Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/System_booted_to_backup_Firmware_image_and_aborts_AUTOBOOT
      When powering up of system, node boots from backup firmware image and halts at LOADER with the following: Press <del> or <esc> to enter setup. Press <f7> to enter Boot Menu. CPU 0 : Intel(R) Xeon(R) S...When powering up of system, node boots from backup firmware image and halts at LOADER with the following: Press <del> or <esc> to enter setup. Press <f7> to enter Boot Menu. CPU 0 : Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz Core : 10 CPU 1 : Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz Core : 10 Ready to boot. *** Booted from Backup Firmware Image *** Failed to read to KCS device There is no output content with the 'system log' command. Running Backup Firmware