Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 1 results
    • https://kb.netapp.com/on-prem/E-Series/Management-Apps-KBs/What_Firewall_Port_does_SANtricity_use
      ​ ​ ​ Applies to E-Series Controller Firmware 7.xx Answer When configuring a firewall to use SANtricity on the outside of the network on which the storage system is, the TCP port 2463 should be opened...​ ​ ​ Applies to E-Series Controller Firmware 7.xx Answer When configuring a firewall to use SANtricity on the outside of the network on which the storage system is, the TCP port 2463 should be opened. On the client-end of the connection, the port can be any, which is greater than 1023. AutoSupport in 07.86 and later will use the same port, so no other port needs to be opened.