What is the recommended Fillword setting for using 8GBps Brocade switches? 0 | -idle-idle Sets IDLE mode in the Link Init and IDLE as the fill word (default) 1 | -arbff-arbff Sets ARB(ff) in the Link ...What is the recommended Fillword setting for using 8GBps Brocade switches? 0 | -idle-idle Sets IDLE mode in the Link Init and IDLE as the fill word (default) 1 | -arbff-arbff Sets ARB(ff) in the Link Init and ARB(ff) as the fill word 2 | -idlef-arbff Sets IDLE mode in the Link Init and ARB(ff) as the fill word The recommended Fillword mode is 3 as it captures more cases then 1 or 2 Changing fillword is a disruptive event as the port will bounce when this change is made.