In case there is a loss of power during the certificate replacement procedures, manually re-key the drives to default Key ID 0x0 temporarily before replacing the certificates. Run: disk encrypt rekey ...In case there is a loss of power during the certificate replacement procedures, manually re-key the drives to default Key ID 0x0 temporarily before replacing the certificates. Run: disk encrypt rekey <Key-ID> * (This is the Key ID from Step 1b above, the Key ID should also be on the key_manager query output) Rekeying the drives to default KeyID 0x0 will allow full access to the data on the encryption drives without the requirement for key server authentication.
