Prior to Data ONTAP 7.3.1, the only way to clear a hung rsh process is to reboot the storage system. For Data ONTAP 7.3.1 and later, the storage administrator can use the rshkill command. Use rshstat ...Prior to Data ONTAP 7.3.1, the only way to clear a hung rsh process is to reboot the storage system. For Data ONTAP 7.3.1 and later, the storage administrator can use the rshkill command. Use rshstat -a to display the active the rsh sessions: Then, use the rshkill command to clear the process. RSH is disabled by default- ---RSH is disabled in the pre-defined management firewall policy for clustered ONTAP To enable rsh in clustered data ontap 8 and ontap 9 run the following command :