Skip to main content
NetApp Knowledge Base

SnapDrive for Unix fails to show storage with error no NETAPP devices to show

  1. Last updated
  2. Save as PDF
Views:
157
Visibility:
Public
Votes:
6
Category:
snapdrive-for-unix
Specialty:
legacy
Last Updated:

Applies to

SnapDrive for Unix

Issue

When running the SnapDrive for Unix command snapdrive storage list -all it returns the error
 
WARNING: This operation can take several minutes based on the configuration.
0001-185 Command error: storage show failed: no NETAPP devices to show or add the host to the trusted hosts (options trusted.hosts) and enable SSL on the storage system or retry
after changing snapdrive.conf to use  http for storage system communication and restarting SnapDrive daemon.
 
From the sd-trace.log.init:

07-10-2021 17:40:41 [55834 bfb77740]i,2,17,Filer::getIpAddressByDns: ntapstorage1 => 192.168.0.130
07-10-2021 17:40:41 [55834 bfb77740]v,2,6,Operation::getMgmtInterfaceFromDatapath: get_sysmgmt_from_datapath: 192.168.0.130 ret: 33
07-10-2021 17:40:41 [55834 bfb77740]v,2,6,Operation::getMgmtInterfaceFromDatapath: datapath:ntapstorage1 sysName:NULL mgmtInterface:ntapstorage1 isConfigured:0
07-10-2021 17:40:41 [55834 bfb77740]v,2,6,Operation::getMgmtpathFromSysname: get_mgmtpath_from_sysname: ret: 33
07-10-2021 17:40:41 [55834 bfb77740]v,2,6,Operation::getMgmtpathFromSysname: sysName:ntapstorage1 mgmtpath:ntapstorage1 isConfigured:0
07-10-2021 17:40:41 [55834 bfb77740]v,2,18,FilerZephyr::connect: filername:ntapstorage1 mgmtInterface:ntapstorage1
07-10-2021 17:40:41 [55834 bfb77740]i,2,18,FilerZephyr::output in =

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.