Skip to main content
NetApp Knowledge Base

SDU - SnapDrive storage shows - all fails with HBA Assistant not found on Cisco Storage Drivers (RHEL 7)

Last Updated:

Applies to

SnapDrive for Unix (Linux) 5.3.2
08:00.0 Fibre Channel: Cisco Systems VIC FCoE HBA (rev a2)
Subsystem: Cisco Systems VIC 1240 MLOM FCoE HBA
Kernel driver in use: fnic
RHEL 7.5


The sd-trace.log of the actual SnapDrive storage shows -all command:
addErrorReport: (1) Operation:??? 6 1877:HBA assistant not found. Commands involving LUNs should fail.
0002-197 Admin error: Please verify that the appropriate transport protocol, volume manager, file system and
multipathing type are installed and configured in the system. If NFS is being used, this warning message can be ignored.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.