Skip to main content
NetApp Knowledge Base

Network and BIOS firmware version mismatch after upgrading to Element 12.3

Views:
525
Visibility:
Public
Votes:
1
Category:
netapp-hci
Specialty:
hci
Last Updated:

Applies to

  • NetApp H610S
  • NetApp Element software 12.3

Issue

After Element 12.3 upgrade of an H610S node, on NetApp SolidFire Active IQ appears:

  • NETWORK_FIRMWARE_VERSION_ETH1 should be >= 14.25.1020 (MT_2420110034) BUT IS 14.22.1002
  • NETWORK_FIRMWARE_VERSION_ETH0 should be >= 14.25.1020 (MT_2420110034) BUT IS 14.22.1002
  • BIOS_VERSION should be >= 3B06 but is 3B03

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.