Skip to main content
NetApp Knowledge Base

NetApp H610S has NETWORK_FIRMWARE_VERSION mismatch alert after node downgrade or RMA replacement

Last Updated:

Applies to

  • NetApp Element software 10.4
  • NetApp H610S storage node


After downgrading (usually while adding a new node to a cluster or for an RMA replacement) H610S node generate alerts which states that the current NIC firmware is higher than expected and supported for this version of Element as below;

NETWORK_FIRMWARE_VERSION_ETH0 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)
NETWORK_FIRMWARE_VERSION_ETH1 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)

Note: Please see Additional Information for a full description of the alert.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.