Skip to main content
NetApp Knowledge Base

How to restart the NDE process if NDE or scale failed?

  1. Last updated
  2. Save as PDF
Views:
819
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

Applies to

NetApp HCI versions 1.6 and prior

Answer

  • Access NodeUI ( https://<Node MIP>:442)
  • Click "System Utilities" tab and input following under "Restart Services"
    • Service: sf-nde
    • Action: restart

In versions 1.7 and above, NDE can be re-run without a manual restart.

Additional Information

For some scenarios it does not work, take one of the following approaches:

  • Perform NDE Scale on another storage node (go to any storage node’s MIP)
  • Wait 72 hours for Scale to reset and then re-run it from any storage node
  • Contact NetApp support, who can apply a patch for this issue
  • (for new installations) deploy with HCI version 1.7 or above

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.