Skip to main content
NetApp Knowledge Base

FAN is spinning too slow on FAS70 even after replacing the FAN

  1. Last updated
  2. Save as PDF
Views:
28
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
HW
Last Updated:

This knowledge base was generated through a script and may contain formatting issues. For the accurate content, please refer to the WIP editor. WIP editor.

Applies to

FAS70

Issue

  • Sensor F2 of SysFan 5 was spinning too slow.

EMS-LOG-FILE.GZ
[NODE:env_mgr:monitor.chassisFan.degraded:alert]: Chassis fan is degraded: Sysfan5F2 Speed is spinning too slow (900 RPM)
[NODE:statd:monitor.fan.failed:alert]: One fan has failed: Sysfan5F2.
[NODE:env_mgr:callhome.c.fan.fru.fault:error]: Callhome for CHASSIS FAN FRU FAILED: Sysfan5F2 Speed

PLATFORM-SENSORS.XML
Sysfan5 F1 Speed    fan    normal    11100    RPM            2000    3000    18000    20000
Sysfan5 F2 Speed    fan    crit-low    900    RPM            2000    3000    18000    20000
Bad Fan Bitmap    unknown    crit-high    512                -1            1
Sysfan5 F1    discrete    normal            normal    GOOD                
Sysfan5 F2    discrete    fault            normal    BAD

SP-LATEST-IPMI
Sysfan5 Status           normal             9          --          --          --          --       
Sysfan5 Present                         PRESENT
Sysfan5 F1 Speed         normal         11100 RPM    2000 RPM    3000 RPM   18000 RPM   20000 RPM   
Sysfan5 F2 Speed         critlow          900 RPM    2000 RPM    3000 RPM   18000 RPM   20000 RPM   
Bad Fan Bitmap           crithigh         512          -1          --          --           1      

  • Fan was replaced, yet the issue persisted.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.