OnCommand Insight: What are the Brocade CLI/SSH commands run by the Brocade CLI Data Source?
Applies to
- OnCommand Insight
- Cloud Insight
- Inventory data
Answer
Common Brocade switch commands used for troubleshooting OnCommand Insight Data collection
- Run the below commands via PuTTY/SSH session, from the Oncommand Insight acquisition unit
| Command | Expected Command Function |
| Version | Display the switch software version |
| alishow | Display aliases on the switch |
| cfgshow | Shows zones available on switch |
| configshow | Used that certain fabric parameters are configured correctly |
| diagshow | Displays switch diagnostics |
| errdump | Display system messages from all switches in same fabric |
| fabricshow | Displays fabric membership information |
| fabstatsshow | Keeps count of all segmentations |
| fosconfig-show | |
| ipaddrshow | Display IP address |
|
islShow, trunkShow, topologyShow |
Display Fabric Topology |
| nbrstateshow | |
| nscamshow | Name server entries on remote switches |
|
nsshow, nsshow-t |
Verifies clients are logged into same server |
| pdShow | Displays information for specified core file |
| portshow | Display individual port status |
| portStatsShow | Display port hardware statistics counters |
| porterrshow | Display ports errors |
| portLogDumpPort | create dump file of port logs |
| savecore -l | Create Brocade core file(s) |
| sfpshow | |
| snmpConfig--show accessControl | Display accesscontrol security settings on the switch |
| snmpConfig-show mibCapability | Display MIB information |
| snmpConfig-show snmpv3 | Display SNMPv3 configuration settings |
| supportshow | Displays switch information for debugging |
| supportsave | Collects and packages debug output |
| switchshow | Displays status of Fibre Channel (FC) switch and ports |
| switchstatusshow | Displays switch status info. |
| trunkshow | |
| wwn -sn |
Additional Information