Skip to main content
NetApp Knowledge Base

Does StorageGRID support the use of SNMP test traps?

Views:
180
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
sgrid
Last Updated:

Applies to

NetApp StorageGRID 11.5 and below

Answer

No, StorageGRID does not support the use of SNMP test traps.

Additional Information

To test a SNMP connection use one of the following workarounds, both using the SNMPv2-MIB:coldStart trap:

  1. Use snmptrap to quickly test a SNMP connection. Example: snmptrap -v1 -c (Destination address) 1.3.6.1.6.3.1.1.5 "" 0 0 "".

If the SNMP management station receives the SNMP coldStart trap we can conclude that  the network and the SNMP management station are configured correctly.

  1. Restart the SNMP service using service snmpd restart if the current configured connection is working

If step 2 works the SNMP configuration is a working one.

 

If problem persists, please check the SNMP Configuration and also consult this KB with known SNMP issues

 

 

******************************************************* *******************************************************