Skip to main content
NetApp Knowledge Base

StorageGRID FC-Link to E-Series port is down

Views:
804
Visibility:
Public
Votes:
0
Category:
storagegrid
Specialty:
esg
Last Updated:

Applies to

  • NetApp E-Series
  • NetApp StorageGRID Appliance SG6000
  • NetApp StorageGRID Appliance SG5700

Issue

  •  FC-Link port down on E-Series controller from storage-array-profile file 

 Host interface:                  Fibre
         Host Interface Card(HIC):     Baseboard
         Channel:                      1
         Port:                         0a
         Current ID:                   Not applicable/0xFFFFFFFF
         Preferred ID:                 4/0xE1
         NL-Port ID:                   0xFFFFFF
         Maximum data rate:            16 Gbps
         Current data rate:            Not available
         Data rate control:            Auto
         Link status:                  Down    

 

  • kern.log shows links up are on StorageGRID

Feb 11 08:04:57 localhost kernel: [    9.089183] lpfc 0000:b0:00.0: 0:3176 Port Name 0 Physical Link is functional
Feb 11 08:04:57 localhost kernel: [   10.205783] lpfc 0000:b0:00.1: 1:3176 Port Name 1 Physical Link is functional
Feb 11 08:04:57 localhost kernel: [   11.377554] lpfc 0000:b0:00.2: 2:3176 Port Name 2 Physical Link is functional
Feb 11 08:04:57 localhost kernel: [   12.625471] lpfc 0000:b0:00.3: 3:3176 Port Name 3 Physical Link is functional

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.