Skip to main content
NetApp Knowledgebase

How to upgrade the StorageGRID Webscale Appliance Installer firmware version 2.0.0 to 2.0.1 for SG57XX NVRAM and SFP Incorrect Settings

Views:
77
Visibility:
Public
Votes:
0
Category:
storagegrid-webscale
Specialty:
sgrid
Last Updated:

Applies to

  • StorageGRID Appliance    
  • StorageGRID Webscale 

Description

This article describes the steps to upgrade the StorageGRID Webscale Appliance Installer firmware similar to ones documented in Support_Bulletins ID: SU298 ( StorageGRID Webscale SG57XX Software Installer 2.0.0 Incorrect Deployment Settings are fixed)
This article describes the steps to upgrade from 2.0.0 for the SG5712 and SG5760 (also known as E5700SG) to StorageGRID Webscale Appliance Installer 2.0.1 as highlighted in yellow below.

README.txt:

Important: Please Read
======================
 
NOTE: StorageGRID Webscale Appliances come from the factory preinstalled with all necessary firmware. You do not need to, and should not, manually apply a StorageGRID Webscale Appliance firmware upgrade or downgrade, unless you are instructed to do so by NetApp support. In that event, you can find all current versions of the StorageGRID Appliance firmware in this zip archive.
 
NOTE: This archive contains firmware for the E5600SG controller in a StorageGRID Webscale Appliance (SG56xx).  If you need to upgrade the firmware in the E2700 controller, you must contact NetApp Technical Support to obtain the correct firmware download files, including the StorageGRID Webscale Appliance version of the E2700 NVSRAM download, which has a -SG1.dlp suffix.  DO NOT apply any other E2700 NVSRAM loads to the E2700 controller in a StorageGRID Webscale Appliance.
 
NOTE: This archive contains firmware for the E5700SG controller in a StorageGRID Webscale Appliance (SG57xx).  If you need to upgrade the firmware in the E2800 controller, you must contact NetApp Technical Support to obtain the correct firmware download files, including the StorageGRID Webscale Appliance version of the E2800 NVSRAM download, which has a -SG2.dlp suffix.  DO NOT apply any other E2800 NVSRAM loads to the E2800 controller in a StorageGRID Webscale Appliance (SG57xx).
 
NOTE: This firmware can only be applied to StorageGRID Webscale Appliances that are in a preinstalled state.  If you have already installed StorageGRID Webscale software on your StorageGRID Webscale Appliances, firmware upgrades or downgrades to the version used by your StorageGRID Webscale software release will be applied automatically by the system.  No further action is required.

 

Contents of this Archive
========================
 
1.  StorageGRID-Webscale-Appliance-Firmware/README.txt
 
    This file.
 
2.  StorageGRID-Webscale-Appliance-Firmware/E5600SG
 
    Subdirectories containing StorageGRID Webscale Appliance firmware versions  for the E5600SG controller in a StorageGRID Webscale Appliance (SG56xx).
 
3.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-1.3-for-SGWS-10.2
 
    File Size   File Name
           85   NetApp-PGE_1.3.0-20150422.1458.a2bf977.bin.sha1
    336422351   NetApp-PGE_1.3.0-20150422.1458.a2bf977.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version  1.3.0.
 
    Use this firmware with systems running StorageGRID Webscale version 10.2.
 
4.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-1.6-for-SGWS-10.3
 
    File Size   File Name
           85   NetApp-PGE_1.6.0-20160413.1739.3810b38.bin.sha1
    306800581   NetApp-PGE_1.6.0-20160413.1739.3810b38.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version 1.6.0.
 
    Use this firmware with systems running StorageGRID Webscale version 10.3.
 
5.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-1.7-for-SGWS-10.4
 
    File Size   File Name
           85   NetApp-PGE_1.7.0-20170209.2006.782b44c.bin.sha1
    425080246   NetApp-PGE_1.7.0-20170209.2006.782b44c.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version  1.7.0.
 
    Use this firmware with systems running StorageGRID Webscale version 10.4.
 
6.  StorageGRID-Webscale-Appliance-Firmware/E5600SG/Version-2.0-for-SGWS-11.0
 
    File Size   File Name
           85   NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.sha1
    447921955   NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature  (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version 2.0.1.
 
    Use this firmware with systems running StorageGRID Webscale version 11.0.
 
7.  StorageGRID-Webscale-Appliance-Firmware/E5700SG
 
    Subdirectories containing StorageGRID Webscale Appliance firmware versions  for the E5700SG controller in a StorageGRID Webscale Appliance (SG57xx).
 
8.  StorageGRID-Webscale-Appliance-Firmware/E5700SG/Version-2.0-for-SGWS-10.3-through-11.0
 
    File Size   File Name
           85   NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.sha1
    447921955   NetApp-PGE_2.0.1-20180103.2049.e7f61c1.bin.tar.bz2
 
    Installer firmware image (.tar.bz2) and firmware image SHA1 signature (.bin.sha1) for StorageGRID Webscale Appliance Installer firmware version  2.0.1.
 
    Use this firmware with systems running StorageGRID Webscale version 10.3, 10.4, and 11.0.

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support