Skip to main content
NetApp Knowledge Base

StorageGRID does not report alert when network port is brought down manually

  1. Last updated
  2. Save as PDF
Views:
386
Visibility:
Public
Votes:
0
Category:
storagegrid-webscale
Specialty:
sgrid
Last Updated:

Applies to

NetApp StorageGRID 11.4 and above

Issue

When a network port is manually brought down using ifconfig command, StorageGRID does not report the Storage appliance link down on network port alert

  • root@AMS-SG5712-8T-4:/var/local/log # ifconfig hic2

hic2: flags=6211<up,broadcast,running,slave,multicast> mtu 1500

ether 00:a0:98:d5:46:7c txqueuelen 1000 (Ethernet)

RX packets 5 bytes 1016 (1016.0 B)

RX errors 0 dropped 87 overruns 0 frame 0

TX packets 2 bytes 256 (256.0 B)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

device interrupt 120 memory 0x386000680000-3860006fffff

  • root@AMS-SG5712-8T-4:/var/local/log # ifconfig hic2 down
  • root@AMS-SG5712-8T-4:/var/local/log # ifconfig hic2

hic2: flags=6146<broadcast,slave,multicast> mtu 1500

ether 00:a0:98:d5:46:7c txqueuelen 1000 (Ethernet)

RX packets 130 bytes 18022 (17.5 KiB)

RX errors 0 dropped 95 overruns 0 frame 0

TX packets 8 bytes 1024 (1024.0 B)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

device interrupt 120 memory 0x386000680000-3860006fffff

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.