Skip to main content
NetApp Knowledge Base

How to block the CIFS and NFS protocols on the Element mNode

Views:
441
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
hci
Last Updated:

Applies to

  • NetApp SolidFire
  • NetApp HCI
  • Management node (mNode) running management services 2.11 or above

Description

The Element Management Node (mNode) utilizes an SMB (Samba) share during the firmware upgrade process for compute nodes; as a result, these protocols and associated ports are open on the mNode and will appear as such in the results of a security scan:

  • NFS - 2049 TCP/UDP
  • CIFS - 445 TCP / 139 TCP

A patch is available which can be used to:

  • block the ports for one or both of these protocols on the mNode
  • unblock the ports for these protocols (this is necessary in order to run a compute node upgrade; the ports can be re-blocked afterwards)

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.