Skip to main content
NetApp Knowledge Base

What is default FEC mode of Mellanox 25GbE port on HCI?

Views:
34
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
hci
Last Updated:

Applies to

H610

Answer

25GbE port on H610 is a Mellanox ConnectX-4 Lx ethernet adapter. According to Mellanox community article, the FEC mode is auto-negotiate by default. If the other side supports FEC, FEC is then enabled. If not, FEC is then disabled.

Additional Information

FEC modes supported of Mellanox ConnectX-4 Lx ethernet adapter are AU(Auto)/NF(No-FEC)/FC(FireCode FEC)/ RS(RS-FEC)