Skip to main content
NetApp Knowledge Base

ONTAP SAN FC aborts SLES lost LUN access

Views:
94
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
san
Last Updated:

Applies to

  • ONTAP
  • SUSE SLES 15 SP3
  • Cisco UCS VIC 1440
    • ENIC 4.0.0.19
    • FNIC 2.0.0.74

Issue

  • After hardware refresh of Cisco Nexus 5000 to 9000, CRC errors between Fabric interconnect and Nexus
  • SUSE SLES servers have periodic FC aborts and paths going down, MPIO hangs on path_checker "tur"
 
Example:
CISCO:
Show interface fc1/x
X Discards, Y errors
Z invalid CRC
 
ONTAP EMS:
fct_tpd_work_thread_0: scsitarget.ispfct.cttimeout:debug]: FC HBA nport  timed out while transmitting common transport frame of type 0x1 and command code GPPN
 
LINUX:
abort called for exch 4f78, status 3 rx_id 0 s_stat 0x0 xmit_recvd 0x0
burst_offset 0x0 sgl_err 0x0 last_param 0x0 last_seq_cnt 0x0  tot_bytes_exp 0x10000 h_seq_cnt 0x0  exch_type 0x1 s_id 0xb0098 d_id
0xb0121 host_tag 0xa tm_req 0x2 age 29 scsi_opcode 2a wq 13 mss 800

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.