Skip to main content
NetApp Knowledge Base

Node sensors output not working and failing BMC update at 10 and 93 percent

Views:
599
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

Applies to

  • AFF-A220
  • FAS2750
  • BMC 11.5

Issue

  • The environtment sensors output fails in one node:
::> system environment sensors show -state fault
Warning: Unable to list entries on node <node1_name>. Timeout: Operation
"environment_sensors_iterator::next()" took longer than 25 seconds to
complete [from mgwd on node "<node_name>" (VSID: -1) to mgwd at
169.254.231.159]
Error: show failed: Timeout: Operation "environment_sensors_iterator::next()"
took longer than 25 seconds to complete [from mgwd on node
"<node1_name>" (VSID: -1) to mgwd at 169.254.231.159]
 
  • The BMC automatic or manual network-full firmware upgrade to 11.5 stops at 10%: 
::*> system service-processor image update-progress show
In Percent
Node Progress Start Time Done End Time
---------------- -------- ------------------- ------- -------------------
<node1_name>  no 7/10/2020 10:50:00 10 7/10/2020 10:50:40
<node2_name>  no - 0 -
2 entries were displayed.
 
RMPALMPC02::*> system service-processor image update-progress show -instance
Node: <node1_name>
Latest SP Firmware Update Start Timestamp: 7/10/2020 10:50:00
Latest SP Firmware Update Percentage Done: 10
Latest SP Firmware Update End Timestamp: 7/10/2020 10:50:40
Is Update in Progress: no
Node: <node2_name>
Latest SP Firmware Update Start Timestamp: -
Latest SP Firmware Update Percentage Done: 0
Latest SP Firmware Update End Timestamp: -
Is Update in Progress: no
2 entries were displayed.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device