Skip to main content
NetApp Knowledge Base

Flash Cache NVMe Exhausted - AutoSupport Message

Views:
211
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • callhome.nvme.exhausted:alert

Event Summary

  • This message occurs when a flash cache device has reached end of life

Validate

Call home event

FLNVME:HA Group Notification from Node Name (Flash Cache NVMe Exhausted) ALERT

EMS Log
  • Run event log show -severity * -message-name callhome*

Sat Mar 12 13:12:12 +0100 [Node Name: gemini-notif-thread: callhome.nvme.exhausted:alert]: Callhome for Flash Cache NVMe Exhausted.

Command Line
  • Run  system node run -node <node name> -command sysconfig 
	slot 1: Flash Cache NVMe
		Serial Number:      XXXXXXXX
		Part Number:        119-00329
		Hardware Revision:  A0
		Firmware Version:   NA03
		Firmware File:      X3311_S00005000NVM
		Model Name:         X3311A
		Capacity:           1024 GB
		State:              failed

Resolution

  • Please contact NetApp Technical Support and reference this article for further assistance. The solution might require a part replacement.

Additional Information

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.