Boot media is not displayed in "system controller bootmedia show"
Applies to
- AFF-A700s
- ONTAP 9.8P5
- ONTAP 9.7P11
Issue
- EMS alert:
Example:
node01 ALERT hm.alert.raised: Alert Id = BootMediaMissingAlert , Alerting Resource = node01 raised by monitor controller
- Boot media #1 is not displayed in
system controller bootmedia show
Example:
::*> bootmedia show -node node01
Size Bootmedia
Node FRU/Display Name Vendor ID Device ID (MB) State Status
------------- -------------------- --------- --------- ------- --------- ------
node01
BootMedia-2/SAMSUNG 144d a804 122104 good ok
MZVLW128HEGR-00000
- Boot Media #1 is recognized in
sysconfig -a
while syntax error is seen in Boot Media #2.
Example:
slot 0: NVMe Boot Media #1 (0x144d,0xa804)
Boot Media #1 SAMSUNG MZVLW128HEGR-00000 CXB7401Q 119GB 512B/sect (S33WNX0M405995)
slot 0: NVMe Boot Media #2 (0x144d,0xa804)
Boot Media #2 bc: stdin:1: syntax error: / unexpectedGB B/sect()identify request returned error