Skip to main content

NetApp wins prestigious Coveo Relevance Pinnacle Award. Learn more!

NetApp Knowledge Base

Boot media is not displayed in "system controller bootmedia show"

Views:
135
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

Applies to

  • AFF-A700s
  • ONTAP 9.8P5
  • ONTAP 9.7P11

Issue

  • EMS alert:

Example:

node01 ALERT hm.alert.raised: Alert Id = BootMediaMissingAlert , Alerting Resource = node01 raised by monitor controller

  • Boot media #1 is not displayed in system controller bootmedia show

Example:

::*> bootmedia show -node node01
Size Bootmedia
Node          FRU/Display Name     Vendor ID Device ID    (MB) State     Status
------------- -------------------- --------- --------- ------- --------- ------
node01
              BootMedia-2/SAMSUNG  144d      a804       122104 good      ok
              MZVLW128HEGR-00000

  • Boot Media #1 is recognized in sysconfig -a while syntax error is seen in Boot Media #2.

Example:

slot 0: NVMe Boot Media #1 (0x144d,0xa804) 
Boot Media #1 SAMSUNG MZVLW128HEGR-00000   CXB7401Q  119GB  512B/sect     (S33WNX0M405995)   
slot 0: NVMe Boot Media #2 (0x144d,0xa804) 
Boot Media #2 bc: stdin:1: syntax error: / unexpectedGB   B/sect()identify request returned error

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device