Skip to main content
NetApp Knowledge Base

AFF C190, AFF A200, FAS2750, AFF A800 attention LED ON, Set by Expander/BMC

Views:
1,129
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF C190
  • AFF A220
  • AFF A800
  • FAS2750
  • ONTAP 9

Issue

  • Controller attention LED on.
  • BMC output of AFF A800 of command system fru led show all will report
BMC node_name> system fru led show all
FRU LED ID 1 is on
FRU LED ID 2 is on.
FRU LED ID 3 is on. Set by Expander/BMC
FRU LED ID 4 is off
FRU LED ID 5 is off
FRU LED ID 6 is off
FRU LED ID 7 is off
FRU LED ID 8 is off
 
  • BMC output of AFF C190, AFF A200, FAS2750 command system fru led show all will report
BMC node_name> system fru led show all
FRU LED ID 1 is off
FRU LED ID 2 is on. Set by Expander/BMC
FRU LED ID 3 is off
FRU LED ID 4 is on
FRU LED ID 5 is off
FRU LED ID 6 is off
FRU LED ID 7 is off
FRU LED ID 8 is off
 
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.