Skip to main content
NetApp Knowledge Base

Storage show fault reports "ENCLOSURE BYPASSED"

Views:
1,043
Visibility:
Public
Votes:
0
Category:
disk-shelves
Specialty:
hw
Last Updated:

Applies to

  • Data ONTAP 8
  • ONTAP 9

Issue

  • ENCLOSURE BYPASSED can be found in storage show fault.
> storage show fault -v
Enclosure Status: non-critical
Channel: 3c
Shelf: 1
Shelf Type: DS4246
Product Serial Number: XXXXXXXXXXXX                
Module Type: IOM6
Disk Elements:
Element Status                  Status Bytes  Status Descriptions
...
 19 [Bay 19]: OK                01,13,00,00  
 20 [Bay 20]: NONCRITICAL       03,14,10,04   ENCLOSURE BYPASSED B, BYPASSED B
 21 [Bay 21]: OK                01,15,00,00  
...   
  • sysconfig -a shows the effected disk is normal.

 slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
  Firmware rev:       01.11.00.00
  Base WWN:           5:00a098:0014dc6:88
  Phy State:          [0] Enabled, 6.0 Gb/s
                      [1] Enabled, 6.0 Gb/s
                      [2] Enabled, 6.0 Gb/s
                      [3] Enabled, 6.0 Gb/s
  QSFP Vendor:        Molex Inc.     
  QSFP Part Number:   112-00176+A0   
  QSFP Type:          Passive Copper 0.5m ID:00
  QSFP Serial Number: 235621256
                ...
                01.19: NETAPP   X308_SMNRY03TSSA NA00 2538.5GB 512B/sect (Z297CDM7)
                01.20: NETAPP   X308_THARR03TSSM NA00 2538.5GB 512B/sect (16S3K7ZUF)
                01.21: NETAPP   X308_THARR03TSSM NA00 2538.5GB 512B/sect (16SDK6P1F)

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support

 

  • Was this article helpful?