Skip to main content

NetApp wins prestigious Coveo Relevance Pinnacle Award. Learn more!

INSIGHT Japan :2023年 1月25日(水)ANAインターコンチネンタルホテル開催 へ参加・申込を行う

NetApp Knowledge Base

Switch port faulty events reported on error logs

Views:
79
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
san
Last Updated:

Applies to

Brocade switches

Issue

Port faulty events reported on errdump output from switch logs
 
2022/01/11-13:07:35, [MAPS-1021], 404729, FID 128, WARNING, SWITCH1, RuleName=SWITCHFAULTY_PORTS_6, Condition=SWITCH(FAULTY_PORTS>=6.00), Obj:Switch [ FAULTY_PORTS,7.75 %] has contributed to switch status CRITICAL.
2022/01/11-13:07:35, [MAPS-1020], 404730, FID 128, WARNING, SWITCH1, Switch wide status has changed from HEALTHY to CRITICAL.
 
2022/01/11-16:02:35, [MAPS-1021], 404779, FID 128, WARNING, SWITCH2, RuleName=SWITCHFAULTY_PORTS_10, Condition=SWITCH(FAULTY_PORTS>=10.00), Obj:Switch [ FAULTY_PORTS,18.75 %] has contributed to switch status CRITICAL.
2022/01/11-16:02:35, [MAPS-1020], 404780, FID 128, WARNING, SWITCH2, Switch wide status has changed from HEALTHY to CRITICAL.
 
  • SWITCHFAULTY_PORTS_6" is triggered when more than 6 Ports are faulty on the switch.
  • SWITCHFAULTY_PORTS_10 is triggered when more than 10 Ports are faulty on the switch.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device