Skip to main content
NetApp Knowledge Base

Periodic switch data collection for NetApp Cluster Switches doesn't work

  1. Last updated
  2. Save as PDF
Views:
350
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9.7P14
  • Cluster Network Switch (CNS) Cisco NX3232C with NX-OS fw. 7.0(3)I7(9) and RCF_v1.6_MetroCluster-IP file

Issue

  • Cluster switch log collection doesn't prompt for CNS admin password. Example:
::*> system cluster-switch log setup-password
Enter the switch name: cnswitch01(ABBC12345D6E)
RSA key
fingerprint is 00:11:22:33:44:55:66:77:88:99:10:11:12:13:14:16
Do you want to continue? {y|n}:: yes
::*>
  • Log collection enablement fails. Example:
::*> system cluster-switch log enable-collection
Do you want to enable cluster log collection for all nodes in the cluster? {y|n}: y
cnswitch01(ABBC12345D6E)Error: Cluster switch password has not been configured on the cluster - aborting.
  • No errors reported in the cluster. Example:
::> system health alert show
This table is currently empty.
 
::> system cluster-switch log show
Log Collection Enabled: false
Index  Switch Log               Timestamp Status
------ ------------------------ --------- ------
1      cnswitch01(ABBC12345D6E) -         -
2      cnswitch02(ABBC12345D6F) -         -
2 entries were displayed.
  • Normal SSH login with admin user to the CNS, works.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.