Skip to main content
NetApp Knowledge Base

Nodes down during RCF Configuration Upgrade - incorrect RCF applied

  1. Last updated
  2. Save as PDF
Views:
164
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

  • Cisco Cluster Switches
  • FAS/AFF Systems

Issue

  • One or more nodes go down while performing an RCF upgrade on the cluster switches.
  • The cluster ports flap and are degraded:

[NetApp-01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node NetApp-01, port e0b.
[NetApp-01: vifmgr: vifmgr.clus.linkdown:EMERGENCY]: The cluster port e0b on node NetApp-01 has gone down unexpectedly.
[NetApp-01: intr: netif.linkUp:info]: Ethernet e0b: Link up.
[NetApp-01: vifmgr: vifmgr.portup:notice]: A link up event was received on node NetApp-01, port e0b.
[NetApp-01: vifmgr: vifmgr.reach.noreach:notice]: Network port e0b on node NetApp-01 cannot reach its expected broadcast domain Cluster:Cluster. No other broadcast domains appear to be reachable from this port.
[NetApp-01: intr: netif.linkDown:info]: Ethernet e0a: Link down, check cable.
[NetApp-01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node NetApp-01, port e0a.

  • Loss of cluster communication between nodes:

HA Group Notification (Health Monitor process cshm: ClusterSwitchConnectivity_Alert[Switch01]) ALERT
HA Group Notification (Health Monitor process cshm: ClusterIfIslDownWarn_Alert[Switch01(XXXXXXX)/Ethernet1/XX]) ALERT
HA Group Notification (CLUSTER NETWORK DEGRADED) ALERT
HA Group Notification (NODE(S) OUT OF CLUSTER QUORUM) EMERGENCY

  • The cluster rings may go offline during this time causing the cluster LIFs to go down.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.