Skip to main content
NetApp Knowledge Base

Cisco Switch NX3232C Panicked after RCF upgrade from 1.6 to 1.8

Views:
312
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

  • Cisco Nexus 3232C
  • Reference configuration file (RCF) 1.8
  • NX-OS

Issue

  • Cluster network switch 1 panic after switch 2 had it's RCF file upgraded from 1.6 to 1.8
  • Issue may also be faced during an NX-OS upgrade
  • EMS logs show:
    • cshmd: hm.alert.raised:alert]: Alert Id = ClusterIfIslDownWarn_Alert
    • cshmd: hm.alert.raised:alert]: Alert Id = ClusterSwitchMissing_Alert
  • Switch 1 show tech-support logs:
    • Port channel 1 down (No operational members)
    • Interfaces belonging to port channel 1 down (suspended (no LACP PDUs))
    • Last reset at 207919 usecs after Sun Jan 16 01:23:50 2022
      Reason: Kernel Panic
      System version: 9.3(7)
    • nxos_panic: Kernel panic - not syncing: Fatal exception
  • Switch 1 rebooted and no further issue with port channel 1

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.