Skip to main content
NetApp Knowledge Base

Cisco Nexus Switch shows PSU/Fan shutdown

  1. Last updated
  2. Save as PDF
Views:
1,283
Visibility:
Public
Votes:
1
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

Applies to

Cisco Nexus Cluster Network Switch

Issue

  • Node reports health alert notificaiton for switch PSU fan not opertional
HMSPFE:HA Group Notification from Node-01 (Health Monitor process cshm: SwitchPsuFanNotOperational_Alert[Switch-01(xxxxxxxxxxxxx)/PowerSupply-2 Fan-1]) ALERT
  • show environment reports fan and power supply for switch as shutdown
     

# show environment
Fan:
---------------------------------------------------------------------------
Fan             Model                Hw     Direction       Status
---------------------------------------------------------------------------
Fan1(sys_fan1)  NXA-FAN-65CFM-PE     --     back-to-front   Ok
Fan2(sys_fan2)  NXA-FAN-65CFM-PE     --     back-to-front   Ok
Fan3(sys_fan3)  NXA-FAN-65CFM-PE     --     back-to-front   Ok
Fan_in_PS1      --                   --     back-to-front   Ok
Fan_in_PS2      --                   --     back-to-front   Shutdown

Power Supply:
Voltage: 12 Volts
Power                      Actual             Actual        Total
Supply    Model            Output             Input        Capacity     Status
                           (Watts )           (Watts )     (Watts )
-------  ----------  ---------------  ------  ----------  --------------------
1        NXA-PAC-1100W-PE2     264 W              294 W      1100 W      Ok
2        NXA-PAC-1100W-PE2       0 W                0 W         0 W   Shutdown

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.