Skip to main content
NetApp Knowledge Base

Brocade Switch remains in MAPS Marginal State

  1. Last updated
  2. Save as PDF
Views:
664
Visibility:
Public
Votes:
2
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

Applies to

  • Brocade FC Switch
  • Fabric OS 8.2 versions below 8.2.3a
  • Fabric OS 9.0 versions below 9.0.1c

Issue

Brocade Switch remains in MAPS Marginal State and cannot be cleared
 
 
Example:
admin>  mapsdb --show

1 Dashboard Information:
=======================

DB start time:            Fri Feb 25 08:07:50 2022
Active policy:            dflt_conservative_policy
Configured Notifications: SW_CRITICAL,SW_MARGINAL,SFP_MARGINAL,FPIN
Fenced Ports :            None
Decommissioned Ports :    None
Fenced circuits :         N/A
Quarantined Ports :       None
Top Zoned PIDs <pid(it-flows)>:    0x011e00(6) 0x011f00(6) 0x011a00(6) 0x011b00(6) 0x010500(4) 

2 Switch Health Report:
=======================

Current Switch Policy Status: CRITICAL
Contributing Factors:
---------------------
*BAD_PWR (CRITICAL).
*BAD_FAN (MARGINAL).
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.