Skip to main content
NetApp Knowledge Base

Temperature sensor 3  PSU 1 Inlet  Alert

Views:
463
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS systems
  • AFF systems
  • Disk shelves

Issue

  • Inlet temp on PSU1 was reading temp that was outside/below Low temp threshold. 
  • PSU2 temp was right at the bottom of the temperature range,  just not low enough to set an alert.

Mon Nov 02 08:54:00 EST [cluster1-A: monitor: monitor.globalStatus.critical:EMERGENCY]: Disk shelf fault.
Mon Nov 02 08:54:21 EST [cluster1-A: power_low_monitor: monitor.chassisPower.degraded:alert]: Chassis power is degraded: Power Supply Status Critical: PSU1.
Mon Nov 02 08:54:21 EST [cluster1-A: power_low_monitor: callhome.chassis.power:error]: Call home for CHASSIS POWER DEGRADED: Power Supply Status Critical: PSU1.

Temperature Sensor installed element list: 1, 2, 3, 4, 5, 6, 7, 8; with error: 3
Shelf temperatures by element:
[1] 12 C (53 F) (ambient)  Normal temperature range
[2] 14 C (57 F)  Normal temperature range
[3] 9 C (48 F) Undertemperature warning!
[4] 34 C (93 F)  Normal temperature range
[5] 10 C (50 F)  Normal temperature range
[6] 43 C (109 F)  Normal temperature range
[7] 22 C (71 F)  Normal temperature range
[8] 24 C (75 F)  Normal temperature range

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.