Skip to main content
NetApp Knowledge Base

Service Processor Error: show failed: RPC: Unable to receive

  1. Last updated
  2. Save as PDF
Views:
764
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS9000,
  • Ontap 9.1P11
  • Service Processor (SP) FW 4.1P2

Issue

  • One node SP does not respond properly.
::> system service-processor show
                               IP           Firmware
Node          Type Status      Configured   Version   IP Address
------------- ---- ----------- ------------ --------- -------------------------
node_name     SP   online      true         4.1P2     23.1.17.82

Error: show failed: RPC: Unable to receive
  • EMS message found:
Number of connection requests for the socket bound to port 935 having the IP ad dress * has reached the limit of 1536 connections. The socket uses TCP protocol. This event has occurred 98 times since the last warning.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.