Skip to main content
NetApp Knowledge Base

SAS port reset with error "Failed to get a response in state 73"

Views:
85
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9

Issue

EMS log shows SAS port reset and disk timeout before SAS port reset.

Example:

09 Dec 2020 23:17:50 [node1: Debug] config_thread raid aggr log CP count: aggregate_type="Aggregate" aggregate_name="AGGR_R1APP602" aggregate_uuid="7a9131b4-63bb-4478-96f4-1f681292dc45" home_owner_id="538033388" home_owner_name="node1" CP_count="2226778"
09 Dec 2020 23:18:35 [node1: Debug] config_thread raid aggr log CP count: aggregate_type="Aggregate" aggregate_name="node1_aggr0" aggregate_uuid="80941bab-3b62-4ebb-842c-0ecd80d3f2a9" home_owner_id="538033388" home_owner_name="node1" CP_count="2984531"
09 Dec 2020 23:52:02 [node1: Error] scsi_cmdblk_strthr_admin scsi cmd checkCondition: deviceType="Disk" deviceName="0d.02.10" cdb="0x28:25fe9428:0008" sSenseKey="SCSI:aborted command" sSenseCode="" iSenseKey="0xb" iASC="0x2f" iASCQ="0x10" iFRU="0x0" DTime="4356"
09 Dec 2020 23:52:02 [node1: Error] scsi_cmdblk_strthr_admin scsi cmd checkCondition: deviceType="Disk" deviceName="0d.02.10" cdb="0x28:288a25e8:0008" sSenseKey="SCSI:aborted command" sSenseCode="" iSenseKey="0xb" iASC="0x2f" iASCQ="0x10" iFRU="0x0" DTime="4368"
09 Dec 2020 23:52:02 [node1: Error] scsi_cmdblk_strthr_admin scsi cmd checkCondition: deviceType="Disk" deviceName="0d.02.10" cdb="0x28:288a2930:0008" sSenseKey="SCSI:aborted command" sSenseCode="" iSenseKey="0xb" iASC="0x2f" iASCQ="0x10" iFRU="0x0" DTime="4353"
09 Dec 2020 23:52:02 [node1: Debug] pmcsas_admin_0 scsi cmd retrySuccess: deviceType="Disk" deviceName="0d.02.10" retryCount="0" freeRetryCount="1" cdb="0x28:25fe9428:0008" dTime="4444"
09 Dec 2020 23:52:02 [node1: Debug] pmcsas_admin_0 scsi cmd retrySuccess: deviceType="Disk" deviceName="0d.02.10" retryCount="0" freeRetryCount="1" cdb="0x28:288a2930:0008" dTime="4375"
09 Dec 2020 23:52:02 [node1: Debug] pmcsas_admin_0 scsi cmd retrySuccess: deviceType="Disk" deviceName="0d.02.10" retryCount="0" freeRetryCount="1" cdb="0x28:288a25e8:0008" dTime="4394"
09 Dec 2020 23:52:08 [node1: Debug] pmcsas_timeout_0 sas device quiesce: adapterName="0a" deviceType="disk" deviceName="0d.02.10"
09 Dec 2020 23:52:12 [node1: Error] pmcsas_timeout_0 sas device timeout: adapterName="0a" deviceType="Disk" deviceName="0d.02.10"
09 Dec 2020 23:52:12 [node1: Info] pmcsas_timeout_0 sas adapter debug: adapterName="0a" debug_string="Level 0 timeout: Abort task set: 0d.02.10 L0 (0xfffff81e6dbd6818,0x2f:1aa49c00:0400,0/0)"
09 Dec 2020 23:52:12 [node1: Info] pmcsas_timeout_0 sas adapter debug: adapterName="0a" debug_string="ABORT TASKSET on device 0d.02.10 L0"
09 Dec 2020 23:52:18 [node1: Debug] pmcsas_timeout_0 sas adapter exception: error="Failed to get a response in state 73" adapterName="0a"
09 Dec 2020 23:52:18 [node1: Info] pmcsas_asyncd_0 sas adapter debug: adapterName="0a" debug_string="ABORT TASKSET of device 0d.02.10 L0 failed (retries exhausted) or timed out -- scheduling HARD LINK RESET"

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support

 

  • Was this article helpful?
******************************************************* *******************************************************