Skip to main content
NetApp Knowledge Base

Old Management switch still visible in ONTAP

Views:
96
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9

Issue

Management switch was removed from cluster but switch is still visible from the following output:
 
Cluster::> set advanced

cluster::*> system cluster-switch show-all
Switch                      Type               Address          Model
--------------------------- ------------------ ---------------- ---------------
SW1(serial_number) cluster-network    10.36.156.177    NX3232C
     Serial Number: serial_number
      Is Monitored: true
            Reason: None
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                    7.0(3)I7(7)
    Version Source: CDP

SW2(serial_number) cluster-network    10.36.156.178    NX3232C
     Serial Number: serial_number
      Is Monitored: true
            Reason: None
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                    7.0(3)I7(7)
    Version Source: CDP

SW3(serial_number)  management-network 10.36.156.180    NX5596
     Serial Number: Unknown
      Is Monitored: false
            Reason: Monitoring Disabled by Default
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                    7.1(1)N1(1)
    Version Source: SNMP

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device