Skip to main content
NetApp Knowledge Base

ONTAP drive X306_SMEGA02TSSM failed with "Failed-Unsupported" status

Views:
434
Visibility:
Public
Votes:
0
Category:
disk-drives
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • X306_SMEGA02TSSM

Issue

  • One or more drives reporting as Failed-Unsupported on the cluster:

::> system node run -node <node_name> -command sysconfig -a
...
00.5 : NETAPP   X306_SMEGA02TSSM NA01   0.0GB 0B/sect (Failed-Unsupported)

  • EMS Messages examples:

::>event log show
...
scsi.cmd.checkCondition:error Disk device 0a.00.5: Check Condition: CDB 0x1b: Sense Data SCSI:aborted command -  (0xb - 0x44 0x0 0x3c)(0). 
scsi.cmd.noMorePaths:error Disk device 0b.00.5: No more paths to device: cdb 0x1b. All retries have failed.
disk.init.err.unsupported:error Disk 0a.00.5 is not recognized as a supported disk and cannot be used on this node.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.