Skip to main content
NetApp Knowledge Base

Node down and partner node triggers PSU critical error

Views:
293
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • AFF-A300
  • FAS8200
  • FAS2720
  • ONTAP 9

Issue

  • Node panic and SP can't be accessed.
  • Partner node triggers the following PSU errors.

HA Group Notification (Health Monitor process cphm: CriticalFruMultiFaultAlert[PSQ0A2184600020]) ALERT
HA Group Notification (CHASSIS POWER SUPPLY DEGRADED: PS 1) ERROR
HA Group Notification (CHASSIS POWER DEGRADED: Power Supply Status Critical: PSU1, PSU2.) ERROR

  • On partner node PSU1 and PSU2 shows BAD status from sp-latest-ipmi

sp-latest-ipmi:
/usr/local/bin/environ -show_all
================================
Sensor Name State Current Critical Warning Warning Critical
                  Reading Low      Low     High    High
-------------------------------------------------------------------------------------------------
PSU2 Bad          TRUE
PSU1 Bad          TRUE
PSU2 need         replacement NO
PSU1need replacement NO
PSU2              BAD
PSU1              BAD

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
  • Was this article helpful?