Skip to main content
NetApp Knowledge Base

Network ports are Admin down after maintenance

Views:
2,449
Visibility:
Public
Votes:
3
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF Systems
  • FAS Systems
  • ONTAP 9

Issue

While making changes to our networking configuration we noticed:

  • e0h is down on 3 of 4  cluster nodes while the rest of the ports were UP
  • The following commands were not providing the reasons why

cluster1::> ifgrp show -fields down-ports
node          ifgrp down-ports
------------- ----- ----------
cluster1-01 a0a   -
cluster1-02 a0a   e0h
cluster1-03 a0a   e0h
cluster1-04 a0a   e0h

 
 
cluster1::> net port show -node cluster1* -port e0h
(network port show)

Node: cluster1-01
Speed(Mbps) Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0h       Default      -                up   9000  auto/10000 healthy

Node: cluster1-02
Speed(Mbps) Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0h       Default      -         down  9000  auto/-     -

Node:  cluster1-03
Speed(Mbps) Health
Port      IPspace  Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0h Default      -                down 9000  auto/-     -

Node:  cluster1-04
Speed(Mbps) Health
Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
e0h       Default      -                down 9000  auto/-     -
4 entries were displayed.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.