Skip to main content
NetApp Knowledge Base

Network port down after ONTAP upgrade

Views:
163
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • FAS2720
  • ONTAP upgrade
  • Switchless configuration
  • CISCO NXOS  9.3(8)

Issue

  • After ONTAP upgrade data port e0e is down. Port e0e is connected to CISCO switch
sysconfig -a
slot 0: 1G/10G Ethernet Controller CNA EP 8324
(Multiple Dual-port, QLogic CNA 8324(8362) rev. 2)
e0e MAC Address: 00:a0:98:xx:xx:xx (auto-unknown-fd-down)
e0f MAC Address: 02:a0:98:xx:xx:xx (auto-10g_twinax-fd-up)
e0c MAC Address: 00:a0:98:xx:xx:xx (auto-unknown-fd-down)
e0d MAC Address: 00:a0:98:xx:xx:xx (auto-unknown-fd-down)
Device Type: EP8324N
Firmware Version: 5.4.66.0
  • Port remains down after cable/SFP reseat on both ends
Scan to view the article on your device
CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support

 

  • Was this article helpful?