Skip to main content
NetApp Knowledge Base

Multiple failed drives after moving disk shelf to new controller

Views:
386
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • X306_WMANT02TSSM
  • NA09
  • Moving disk shelves to FAS8300

Issue

  • Multiple failed drives after moving disk shelves to new FAS8300 controller
 
40.0 : NETAPP   X306_WMANT02TSSM NA09 1695.4GB 512B/sect (WD-WMAURXXXXXXX) (Failed)
40.1 : NETAPP   X306_WMANT02TSSM NA09 1695.4GB 512B/sect (WD-WMAURXXXXXXX) (Failed)
40.2 : NETAPP   X306_WMANT02TSSM NA09 1695.4GB 512B/sect (WD-WMAURXXXXXXX) (Failed)
 
  • Disks appear operational initially, but fail after 10-15 minutes
  • Following errors are seen in EMS log

[Node-01: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Disk device 4b.40.0: request failed after try #1: cdb 0x5f:0601.
[Node-01: scsi_cmdblk_strthr_admin: scsi.debug:debug]: shm_setup_for_failure disk 4b.40.0 (S/N WD-WMAURXXXXXXX) error 80000000h
[Node-01: scsi_cmdblk_strthr_admin: disk.releaseFailed:error]: Disk release failed on 4b.40.0 CDB 0x5f:0601 - SCSI:no sense (0 0 0)
[Node-01: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Disk device 4b.40.0: request failed after try #1: cdb 0x5e:01.
[Node-01: scsi_cmdblk_strthr_admin: disk.readReservationFailed:error]: Disk read reservation failed on 4b.40.0 CDB 0x5e:01 - SCSI:no sense (0 0 0)
[Node-01: sanown_io: diskown.errorDuringIO:error]: error 20 (disk operation timed out) on disk 1c.40.0 (S/N WD-WMAURXXXXXXX) while reading reservation state
[Node-01: config_thread: raid.config.disk.not.responding:notice]: Disk 4b.40.0 Shelf 40 Bay 0 [NETAPP   X306_WMANT02TSSM NA09] S/N [WD-WMAURXXXXXXX] UID [500605BA:000C2D1C:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000] is not responding.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.