Skip to main content
NetApp Knowledge Base

Multiple X438_1625400MCSG drives marked as prefailed during ONTAP upgrade

Views:
414
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 8.3P2
  • ONTAP 9.1P20
  • X438_1625400MCSG drives

Issue

Several X438_1625400MCSG drives fail in short succession some time after the ONTAP upgrade was performed.
 
Messages indicate that the drives were pre-failed during the upgrade process:
 
Tue May 05 17:07:12 CEST [NETAPP-N2: config_thread: raid.disk.predictiveFailure:warning]: Disk 0a.00.2 Shelf 0 Bay 2 [NETAPP X438_1625400MCSG NA04] S/N [S182NEAG123456] reported a predictive failure and it is prefailed; it will be copied to a spare and failed
Tue May 05 17:07:12 CEST [NETAPP-N2: config_thread: raid.disk.predictiveFailure:warning]: Disk 0a.00.1 Shelf 0 Bay 1 [NETAPP X438_1625400MCSG NA04] S/N [S182NEAG234567] reported a predictive failure and it is prefailed; it will be copied to a spare and failed
Tue May 05 17:07:12 CEST [NETAPP-N2: config_thread: raid.disk.predictiveFailure:warning]: Disk 0a.00.3 Shelf 0 Bay 3 [NETAPP X438_1625400MCSG NA04] S/N [S182NEAG345678] reported a predictive failure and it is prefailed; it will be copied to a spare and failed

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device