Skip to main content
NetApp Knowledge Base

Multipath to storage not configured errors and a SAS port is disabled

Views:
460
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • All FAS systems
  • All AFF systems

Issue

  • Issues or loss of communication to disk stack
  • EMS reports the following:
Mon Oct 11 07:58:05 -0600 [node-01: dsa_disc: ses.multipath.ReqError:alert]: SAS disk shelf detected without a multipath configuration.
  • One or both nodes report mixed-path configuration in sysconfig -a
NetApp Release 9.7P9: Thu Nov  5 20:15:56 EST 2020
	System ID: 0XXXXXXXXX (node-01); partner ID: 0XXXXXXXXX (node-02)
	System Serial Number: XXXXXXXXXXXXXX (node-01)
	System Rev: C1
	System Storage Configuration: Mixed-Path
  • There is a SAS port disabled, but has a cable installed
    slot 2: SAS Host Adapter 2b (PMC-Sierra PM8001 rev. C, SAS, <OFFLINE (soft)>)
    	MFG Part Number:    USI 6086-000010-07 rev. MP V4.13
    	Part number:        111-00341+G1
    	Serial number:      xxxxxxxxxxx
    	Date Code:          20150817
    	Firmware rev:       01.12.09.00
    	Base WWN:           5:00e004:xxxxxxx:xx
    	Phy State:          [4] Disabled
    	                    [5] Disabled
    	                    [6] Disabled
    	                    [7] Disabled
    	QSFP Vendor:        Amphenol        
    	QSFP Part Number:   X6558-R6+A0     
    	QSFP Type:          Passive Copper 2m ID:00
    	QSFP Serial Number: xxxxxxxxxxxxxx
    	
    

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.