Skip to main content
NetApp Knowledge Base

How to load BIOS on an AFF A700s if both boot devices have been replaced

Views:
315
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF A700s
  • ONTAP 9

Description

Typically during an AFF A700s primary boot media replacement, the system is able to boot off of the BIOS located on the second boot device.  On very rare circumstances both boot devices might need to be replaced at the same time.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.